AlumaView AV200 Aluminum Glass Doors

Product Features

Raynor AlumaView AV300 aluminum sectional rail and stile doors are available with numerous features and options, including those listed below.

Snap-in Retainer

AlumaView AV300 panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016, and standard white doors use gray snap-ins. All other doors use black snap-ins.

Decreased Energy Costs

Raynor ThermaSeal doors help you reduce energy costs with a u-shaped, vinyl bottom weatherseal and sturdy aluminum retainer.

Rugged Hardware and Springs

Your Raynor ThermaSeal door comes packaged with the right combination of long-lasting hardware, track, and springs to precisely match your door’s size and application.

Integral U-Bar

Integral U-bar construction within the rails of the AV300 creates added strength to the section panels and provides for a clean look on the interior of the door by removing trussing obstructions from visible areas (only required for doors wider than 18’2″).

Energy Saving Options

Header Seal

A flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the door against the header.

Jamb Seal

EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed.

Finish Options and Upgrades

IECC Requirements Package/California Title 24

The International Energy Conservation Code (IECC) requires building components to meet minimum Air Infiltration rates. Exhaust ports and pass doors cannot be used. Visit our IECC page for more information.

Model         Air Infiltration @25mph

AV300            0.24 cfm/ft2
AV200            0.24 cfm/ft2

Model         Tested U Factor

AV300           0.72 (w/ IG Low E Glass)

IECC Requirements

This option will ensure the AV300 and AV200 will exceed the latest IECC and Title 24 standards for air infiltration (only), by using the required header and jamb seals and track mounting.

EnduraCote™

The Raynor EnduraCote hardware system comes with springs, tracks, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.

Choice of Windows

Available in impact glass, tempered, tinted, double pane, insulated, acrylic, or polycarbonate in a variety of thicknesses. Glass thickness range from 1/8″ to 1″.

SleekSightline™

Our AV200 and AV300 models offer a sleek 1-pane or trendy 2-pane glass layout. These new glass layouts are available now and vary depending on glass type and door size.

Model Options and Upgrades

Pedestrian Doors*

Pedestrian doors are designed for convenient entry and to help minimize energy loss. Pedestrian doors are available on the AV200

Aluminum Panels

For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from insulated panels, kick panels, and impact-rated panels as well.

Carbon Monoxide Vent

Allows you to channel fumes to the outside when the Raynor AlumaView AV300 door is closed. Available in a variety of sizes.

Locks

In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.

High-cycle Counterbalance System

For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life.* For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system. *Some options may be limited to door size or model.

Customized Track

Track systems are supplied to fit special clearances, inclines, or contour applications. Hardware and track systems can be customized to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.